Di-PE CAS 126-58-9

CAS:126-58-9

Ịdị ọcha:95%

Usoro Molekụla:C10H22O7

Ibu Molekụla:254.28

EINECS:204-794-1

Oge Nchekwa:afọ 2

Okwu ndị yiri ya:Di-PE; 2,2,6,6,-Tetra(hydroxymethyl)-4-oxaheptane-1,7-diol; 2,2,2',2'-tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol; 2-([3-Hydroxy-2,2-bis(hydroxymethyl)propoxy]methyl)-2-(hydroxymethyl)-1,3-propanediol

Hapụ Ozi Gị

Nkọwa Ngwaahịa

Budata

Akara Ngwaahịa

Kedu ihe bụ Di-PE CAS 126-58-9?

Dịka ihe dị mkpa dị ka ihe dị n'etiti kemịkalụ dị mma, a na-ewere Di-PE dị ka ngwaahịa dị n'etiti ruo na nke dị elu na ụlọ ọrụ Di-PE. A na-ejikarị ya eme ihe n'imepụta mkpuchi UV na-agwọ gburugburu ebe obibi, resin alkyd dị elu, mmanụ ụgbọ elu dị elu, ihe na-eme ka plastik dị mma, polyethers, polyesteres, polyurethanes, na ihe nkiri resin fotosensitive. Maka mkpuchi fotosensitive, enwere ike iji diquaternary acrylates dị ka efere agba ígwè anaghị agba nchara na ihe mkpuchi granite dị elu, yana nrapado siri ike, iguzogide esemokwu, na iguzogide ịka nká dị mma. A na-ejikarị Superfine Di-PE eme ihe n'imepụta mkpuchi ihe mgbochi ọkụ na ihe na-eme ka PVC sie ike.

Nkọwapụta

IHE	Ọkọlọtọ
IHE	Ọkwa 95	Ọkwa 90	Ọkwa 85
Ọdịdị	Ntụ ntụ ọcha
Otu hydroxyl, na/%	39.5~40.5	37.0~40.5	37.0~40.5
Mbelata nkụ, w/%	≤0.5	≤0.8	≤1.0
Ihe fọdụrụ mgbe ọkụ gbanyere, w/%	≤0.05	≤0.10	≤0.10
Agba agba resin Phthalic acid/(Fe, Co, Cu ọkọlọtọ agba agba), Mba	≤1.0	≤2.0	≤2.5
Agba ule sulfuric acid, nkeji Hazen (platinum-cobalt)	≤100	≤200	≤300

Ngwa

1. Mkpuchi

(1) Mmepụta resin polyester: Di-PE na-emeghachi omume na polyacids iji mepụta resin polyester dị elu, nke a na-eji emepụta mkpuchi dị elu dịka mkpuchi ụgbọ ala na mkpuchi coil, ma nwee ike ime ka mkpuchi ndị ahụ nwee ezigbo iguzogide ihu igwe, iguzogide nchara na ịcha mma.

(2) Imepụta resin alkyd: Di-PE bụ ihe dị mkpa maka imepụta resin alkyd. Ihe mkpuchi resin alkyd a na-emepụta nwere ezigbo ihe na-akpọ nkụ, mgbanwe na njikọta, a na-ejikwa ya nke ọma na mkpuchi n'ọhịa owuwu na arịa ụlọ.

2. Ụlọ ọrụ plastik

(1) Ihe eji emepụta plastik sịntetik: Enwere ike iji Di-PE mee ihe dị ka ihe eji emepụta plastik dị iche iche, nke a na-eji na plastik dịka polyvinyl chloride (PVC) iji melite mgbanwe, plasticity na nhazi nke plastik nke ọma.

Nkwadebe nke polyurethane: Di-PE na-esonye na mmeghachi omume nke polyurethane ma a na-eji ya emepụta plastik ụfụfụ polyurethane, elastomers na ngwaahịa ndị ọzọ. A na-eji ihe polyurethane ndị a eme ihe n'ọtụtụ ebe na mkpuchi, nnabata ujo, mkpuchi na akụkụ ndị ọzọ.

(2) Ụlọ ọrụ ink: A na-eji Di-PE emepụta ihe njide ink, nke nwere ike ime ka ink na-egbuke egbuke, ọsọ ịkpọ nkụ na nrapado dịkwuo mma, na-eme ka ngwaahịa ndị e biri ebi nwee ezigbo mma na mmetụta.

3. Ubi ndị ọzọ

(1) Surfactants: Enwere ike iji Di-PE mepụta ụfọdụ surfactants nwere ihe pụrụ iche, nke a na-eji na nchacha, emulsifiers na ngwaahịa ndị ọzọ, ma nwee ezigbo emulsification, dispersion na decontamination.

(2) Kemịkalụ eletrọniki: N'ime ụlọ ọrụ eletrọniki, enwere ike iji Di-PE kwadebe ụfọdụ ihe eji emechi ihe eletrọniki, ihe na-egbochi foto, wdg, nke na-arụ ọrụ dị mkpa na arụmọrụ na nkwụsi ike nke ngwaahịa eletrọniki.